EPOXY FLOORING TOP COAT
Falguni Armour
Epoxy Flooring
Top Coat
ARMOUR EPOXY FLOORING TOP COAT is a premium quality, two-component solvent-based epoxy finish engineered for high-strength, chemical-resistant floors. It delivers a hard, glossy, seamless surface with excellent abrasion resistance, making it ideal for industrial floors, warehouses, garages and showrooms that see heavy foot and vehicular traffic.
High abrasion resistance
Excellent chemical resistance
Tough two-pack epoxy film
Seamless dust-free finish
High gloss retention
Withstands heavy traffic
Easy to clean surface
No cracking & peeling
Chemical Resistant
Two-Pack Epoxy
Industrial Grade
Technical Specifications
Formulated for a hard, glossy, chemical-resistant floor finish that stands up to heavy industrial use.
FORM
Two-Component Liquid (Base & Hardener)
COLOUR
Grey, White & Shade Card Colours
MIXING RATIO
4:1 by Volume (Base : Hardener)
FINISH / THINNER
High Gloss / Epoxy Thinner
AREA OF APPLICATION
Industrial floors, warehouses, garages, showrooms & workshops
COVERAGE
100–120 Sqft / Ltr / Coat
POT LIFE
4–6 Hours After Mixing
DRY TO RECOAT
12–16 Hours
FULL CURE
7 Days for Heavy Traffic
APPLICATION
Mixing
Mix Base and Hardener in the recommended 4:1 ratio and stir thoroughly until uniform. Thin with Epoxy Thinner only if required for application. Apply on a clean, dry, primed floor using roller or brush within the pot life. Apply a primer coat first for porous or new concrete surfaces.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR