ANTI-BACTERIAL PRIMER · WATER BASED
Falguni Armour
Epoxy Anti-Bacterial
Water Based Primer
ARMOUR EPOXY ANTI-BACTERIAL WATER BASED PRIMER is a low-viscosity, two-component water-based epoxy primer infused with an anti-microbial additive. It penetrates and seals porous concrete and masonry surfaces, inhibiting bacterial and fungal growth from the very first coat while building a strong, well-bonded base for hygiene-grade topcoats.
Active anti-bacterial protection
Thinner — water only
Deep penetration & sealing
Strong topcoat adhesion
Touch dry 2–3hrs, recoat 8hrs
No unpleasant odour
Low VOC, eco-friendly
Ideal base for hygiene topcoats
Anti-Bacterial
Water Based
Hygiene Grade
Technical Specifications
Water-based epoxy primer with an anti-microbial additive — safe, low odour and built for hygiene-critical floors.
TYPE
Two-component water-based epoxy primer
COLOUR
Clear / Pale White
MIXING RATIO
3:1 by volume (Base : Hardener)
THINNER / DRYING
Water only / Touch dry 2–3hrs, Recoat 8hrs
AREA OF APPLICATION
Hospitals, pharma units, food & dairy plants, kitchens, labs
COVERAGE
130–150 Sqft / Ltr in one coat
APPLICATION
Mixing
Mix Base and Hardener in the recommended 3:1 ratio and stir thoroughly until uniform. Thin with clean water only if required. Apply on a clean, dry, dust-free and mechanically prepared floor using roller or squeegee, ensuring full coverage into pores before the epoxy topcoat.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR