EPOXY ENAMEL
Falguni Armour
Epoxy
Enamel
ARMOUR EPOXY ENAMEL is a premium quality, two-component solvent-based epoxy finish that delivers a hard, high-gloss, chemical-resistant coat over steel and metal surfaces. Engineered for demanding industrial environments, it combines superior colour and gloss retention with excellent resistance to abrasion, chemicals and corrosion.
High gloss brilliant finish
Excellent chemical resistance
Tough two-pack epoxy film
Strong colour & gloss retention
High abrasion resistance
Strong metal adhesion
Withstands industrial exposure
No cracking & peeling
High Gloss
Two-Pack Epoxy
Industrial Grade
Technical Specifications
Formulated for a hard, glossy, chemical-resistant topcoat that performs under demanding industrial exposure.
TYPE
Two-component solvent-based epoxy enamel
COLOUR
White, Grey & Shade Card Colours
MIXING RATIO
4:1 by volume (Base : Hardener)
THINNER / DRYING
Epoxy Thinner / Touch dry 3–4hrs, Recoat 16hrs
AREA OF APPLICATION
Structural steel, machinery, tanks, pipelines & industrial equipment
COVERAGE
100–120 Sqft / Ltr in two coats
APPLICATION
Mixing
Mix Base and Hardener in the recommended 4:1 ratio and stir thoroughly until uniform. Thin with Epoxy Thinner only if required for spray application. Apply over a suitably primed steel or metal surface using brush, roller or spray within the pot life for the best gloss and finish.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR