EPOXY ZINC PHOSPHATE PRIMER
Falguni Armour
Epoxy Zinc
Phosphate Primer
ARMOUR EPOXY ZINC PHOSPHATE PRIMER is a premium quality, two-component anti-corrosive primer pigmented with zinc phosphate. It provides excellent rust inhibition and a strong, well-bonded base coat for steel and metal structures, offering reliable protection under epoxy or PU topcoats in industrial and general engineering applications.
Excellent rust inhibition
Strong adhesion to steel
Tough two-pack epoxy film
Ideal base for epoxy & PU topcoats
Good hiding and coverage
Non-toxic, lead free
Smooth matt finish
No cracking & flaking
Anti-Corrosive
Zinc Phosphate
Steel & Metal
Technical Specifications
Formulated for reliable rust inhibition with strong adhesion and a dependable base for every topcoat system.
FORM
Two-Component Liquid (Base & Hardener)
COLOUR
Red Oxide / Grey
MIXING RATIO / THINNER
4:1 by Volume / Epoxy Thinner
VOLUME SOLIDS
45–50%
AREA OF APPLICATION
Structural steel, machinery, pipes, tanks & general engineering fabrication
COVERAGE
120–140 Sqft / Ltr / Coat
DFT PER COAT
40–50 Microns
POT LIFE
6–8 Hours After Mixing
DRY TO RECOAT
6–8 Hours
APPLICATION
Mixing
Mix Base and Hardener in the recommended 4:1 ratio and stir thoroughly until uniform. Thin with Epoxy Thinner only if required for spray application. Apply on a clean, dry, rust-free and properly prepared steel surface using brush, roller or spray, allowing adequate drying time before the topcoat.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR