ANTI-BACTERIAL WATER BASED TOP COAT
Falguni Armour
Epoxy Anti-Bacterial
Water Based Top Coat
ARMOUR EPOXY ANTI-BACTERIAL WATER BASED TOP COAT is a premium quality, low-odour, solvent-free epoxy finish infused with an anti-microbial additive that actively inhibits the growth of bacteria and fungi on the coated surface. Ideal for hygiene-critical environments, it combines a hard, seamless, easy-to-clean finish with the safety of a water-based system.
Active anti-bacterial protection
Water based, low odour
Seamless, easy-to-clean surface
Good chemical resistance
High gloss retention
Suitable for hygiene areas
Low VOC, eco-friendly
No cracking & peeling
Anti-Bacterial
Water Based
Hygiene Grade
Technical Specifications
Formulated with an anti-microbial additive for a hygienic, easy-to-clean floor and wall finish in sensitive environments.
FORM
Two-Component Liquid (Base & Hardener)
COLOUR
White & Shade Card Colours
MIXING RATIO / THINNER
3:1 by Volume / Clean Water
FINISH
Smooth High Gloss Finish
AREA OF APPLICATION
Hospitals, pharma units, food & dairy plants, kitchens, labs
COVERAGE
100–120 Sqft / Ltr / Coat
ANTI-BACTERIAL EFFICACY
Inhibits Common Surface Bacteria & Fungi
POT LIFE
45–60 Minutes After Mixing
DRY TO RECOAT
8–10 Hours
APPLICATION
Mixing
Mix Base and Hardener in the recommended 3:1 ratio and stir thoroughly until uniform. Thin with clean water only if required for application. Apply on a clean, dry, primed surface using roller or brush within the pot life, in 2 coats for optimum anti-bacterial performance.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR