EPOXY FLOORING PRIMER
Falguni Armour
Epoxy Flooring
Primer
ARMOUR EPOXY FLOORING PRIMER is a premium quality, low-viscosity two-component epoxy primer engineered to penetrate and seal porous concrete floors. It builds a strong, non-porous base that locks down dust, closes surface pores and ensures maximum adhesion for epoxy topcoats and self-levelling systems.
Deep penetration into concrete
Excellent pore sealing
Strong topcoat adhesion
Dust-proofing formula
Low viscosity, easy spread
Moisture tolerant on cure
Ideal base for epoxy systems
No blistering & delamination
Deep Penetrating
Two-Pack Epoxy
Concrete Grade
Technical Specifications
Formulated to seal porous concrete and provide a strong, well-bonded base for every epoxy flooring system.
FORM
Two-Component Liquid (Base & Hardener)
COLOUR
Clear / Pale Straw
MIXING RATIO
2:1 by Volume (Base : Hardener)
VISCOSITY / THINNER
Low Viscosity / Epoxy Thinner
AREA OF APPLICATION
New & porous concrete floors, industrial & warehouse floors
COVERAGE
130–150 Sqft / Ltr / Coat
POT LIFE
4–5 Hours After Mixing
DRY TO RECOAT
10–14 Hours
SURFACE MOISTURE
Max 6% for Best Adhesion
APPLICATION
Mixing
Mix Base and Hardener in the recommended 2:1 ratio and stir thoroughly until uniform. Thin with Epoxy Thinner only if required for very dense concrete. Apply on a clean, dry, dust-free and mechanically prepared floor using roller or squeegee, ensuring full coverage into pores.
AVAILABLE IN
Pack Sizes
1LTR
4LTR
10LTR
20LTR